Nano4Life NanoDiamond Ultra Paint Protection KIT
$204.50 inc. GST
Nano Technology shine bright like a diamond. NANO4LIFE is proud to present NANODIAMOND 9H-12H the new generation of ceramic protective coating using the most advance nanotechnology .
- Description
- Additional information
- Brand
Description
Nano Technology shine bright like a diamond. NANO4LIFE is proud to present NANODIAMOND 9H-12H the new generation of ceramic protective coating using the most advance nanotechnology .
What is included inside the NANODIAMOND KIT?
- NANODIAMOND 50ML
- Nano4-Preclean 200ML
- A foam Applicator
- A syringe
- Two micro fiber cloths
Where I can Apply?
Any smooth surface like chrome, metal, plastic, glass or painted finished. Giving the maximum Protection it needs.
Product Qualities:
- Scratch Resistance (optimum scale 9H-12H)
- 10 years Permanent Protection
- Car-paint protection against fire
- Anti Grafffiti
- Self-cleaning
- Super waterproofing hydrophobic factors
- Protection from UV radiation
- Extreme weather conditions protection
- Advanced Chemical (Acid) Resistance
- 100% invisible sealing protection
- Frost-proofing and tolerance
- High protection against ice
- Shiny glossy finishing
- Extreme tolerance in high temperatures (up to 1200°C)
- Anti- corrosion protection
- Anti-oxidation protection
- Extreme resistance on chemical corrosion effect
- Shiny paint coverage
- The coating cannot be affected by machine wash and can be removed only by painting procedure.
- 100% Environmental friendly
- Money saving by reducing up to 90% the use of chemical detergents
Application method:
The product should not be applied at air humidity below 25% or over 85%, since curing can be affected or not happen properly. In countries with very high or very low air humidity, application in closed air-controlled spaces is strongly recommended! Ideal conditions are 20º C temperature and 55% air humidity.
You will achieve optimum results if you coat your car indoors. If you cannot apply the product indoors, please make sure that there are no windy weather conditions and no possibility of rainfall over the hours following your coating the glass with NANODIAMOND4-CARPAINT®. The treatment of the target surface should be carried out under ambient conditions and at a temperature between 10º C and 40º C.
SURFACE PREPARATION
1. Before application, please make sure there are no scratches or imperfections on your car paint surface. If there are, you are advised to have them fixed before coating with NANODIAMOND4-CARPAINT®, because after having applied the product, their repair is challenging. NANODIAMOND4-CARPAINT® can be removed from your car paint surface only by mechanical means.
2. Please clean your surface thoroughly as per your standard cleaning practice and make sure that there are no chemical detergent residues. If any chemical substance lingers, NANODIAMOND4-CARPAINT® will not be integrated into the car paint surface. It will stick on the substances and before long, it will go away leaving a protection gap.
3. After this meticulous car cleaning process, it would be even better to sprinkle the surface with isopropyl alcohol or Nano4-Preclean® and rub it with a microfibre cloth to remove all chemical residuals from washing.
4. CAUTION: The Nano4-Preclean® is not a stain removal cleaner and is used only on glossy surfaces. For more info about Preclean, please download the pdf file.
5. Should application take place outdoors, please make sure that your glass surface is totally free of dust, humidity, and water; it needs to be 100% dry.
APPLICATION
1. Please make sure that the aluminum container of NANODIAMOND4-CARPAINT® is sealed.
2. Get a microfibre or non-absorbent cloth that leaves no fabric fibers.
3. Open the bottle. CAUTION: For safety purposes, please keep the product away from children. You will notice the distinctive smell of ammonia in NANODIAMOND4-CARPAINT®. If hard to bear, please wear a medical face mask.
4. In your mind, divide the glass surface into small areas of 30×30 cm.
5. Place the cloth on the open bottle mouth and turn the bottle upside down 2-3 consecutive times, so that the product wets the cloth. With the damp cloth, spread the product on every 30×30 cm area of the surface and then rub it in quick rotating movements, until it gets a shiny look.
IMPORTANT NOTICES
1. If you wish to boost scratch resistance from 9H to 11H* and enhance the shiny look of the car paint surface, please repeat the same coating procedure within 5 minutes after the first application. If you wish to boost scratch resistance from 11H* to 12H* and enhance the shiny look of the car surface, please repeat the same coating procedure within 5 minutes after the second implementation.
3. Please make sure while applying not to leave out any areas, as the whole process is invisible.
COATING STABILISATION TIME
Surface under coating will be water stable after 12 hours approximately
Prior to that 12-hour span, please focus on keeping the car away from water or wet conditions
You can accelerate the 12-hour curing time to 15 minutes by heating the surface at 80º C with a heat gun
Coating stabilisation is complete after five (5) days
During this time, you are strongly advised against cleaning your car with any chemical or mechanical means
Additional information
| Volume (PCC-173) | 200ml, 500ml |
|---|
